OPERATION

Why not fail ever the gas flow at the start of welding with the VIGILAWELD ?

By Fernando Jiménez Colás|2017-09-27T14:40:59+00:00September 27th, 2017|OPERATION|

Before the wire winder valve is opened , the same pressure of the welding cycle is [...]

0

When purge the wire winder valve , what flow does the nozzle leave at the instant before welding?

By Fernando Jiménez Colás|2017-09-27T09:24:04+00:00September 27th, 2017|OPERATION|

The same as previous welding cycle.

Comments Off

What is the residual pressure?

By Fernando Jiménez Colás|2017-09-29T07:43:46+00:00July 24th, 2017|GAS SAVE, OPERATION|

operation

0

How do I find out if a problem or fault occurs?

By Fernando Jiménez Colás|2017-09-29T07:46:18+00:00July 24th, 2017|ALARMS, OPERATION|

alarms

0

For what gases is the VIGILAWELD prepared and calibrated ?

By Fernando Jiménez Colás|2017-09-29T07:46:46+00:00July 24th, 2017|OPERATION|

operation

0

What are the minimum and maximum work flows ?

By Fernando Jiménez Colás|2017-09-29T07:46:56+00:00July 24th, 2017|INSTALLATION, OPERATION|

flow rates

0

Can I change the flow rate as and when I want , without having to manually operate the regulator unit every time?

By Fernando Jiménez Colás|2017-09-29T07:47:07+00:00July 24th, 2017|OPERATION|

gas preset

0

Can we preset analogally the gas flow?

By Fernando Jiménez Colás|2017-09-29T07:47:22+00:00July 24th, 2017|OPERATION|

gas preset

0

Can I know the actual flow that is reaching the nozzle?

By Fernando Jiménez Colás|2017-09-29T07:47:31+00:00July 24th, 2017|OPERATION|

real gas

0

Is it protected against unauthorized changes and manipulations?

By Fernando Jiménez Colás|2017-10-01T08:03:39+00:00July 24th, 2017|OPERATION|

Operation

0